LANGUAGE
MENU
Latest News
HOME>News>Back
BLOG
26.Mar.2021

Comparative analysis with other brands

Distinct advantages compare to W brand: Our cutting tool is able to rotate more 
freely  compare to Wirtgen’s cutting tool. Unlikely to partial wear, more even wear, 
easier to operate, better milling flatness, not easy to wear (due to our special design 
spring clip, bringing more expansion space in the tool holder). Wirtgen does not have too 
much space to expand, leading the cutting tool easier to seize inside the tool holder resulting 
in higher possibility of partial wear.

 

W brand model 22 tool holder + W6/20X2 cutting tool:

      

                       (Demonstrate of partial wear)

 

W brand model 11 tool holder + W7/20X2 cutting tool:

      

                         (Demonstrate of partial wear)

The renew of W brand’s cutting tool: After June 2019, a new Wirtgen
asphalt cutting tool released in Taiwan. The body is shorter and wider
than before, and the tungsten tip is longer. The purpose is to increase
its lifespan. Spring clip dimension remain unchanged, washer is thinner,
after using, the washer will attach to the tool holder to protect it.
The partial wear condition still happened, some customers believe that
the wear resistance and the actual number of working hours do not have
much difference from the previous model.

W6-20X2:                         W7-20X2:

      

In 2020, Wirtgen’s washer renewed to the same thickness as our washer,
carbide body is now thicker, the tip is sharper, the cone shape is more
distinct. At present, 8600 square meters are used in the central part of
Taiwan and the situation of partial wear is still serious.

     

         (Demonstrate of partial wear On the right graph)

 

The 2018 record data shows the actual situation of W brand 22 model tool
holder with Everpads cutting tool T6W and T7WS. Show as below:

          

 

Milling Area

For milling machines above 2M, under normal construction condition and
operation:

T7WS, medium hardness asphalt or concrete pavement, setting 5CM depth can
be cut to 16000-17000 square meters (tested in W250)

T6W, medium hardness asphalt or concrete pavement, 3CM setting can be
cut out to 12000 square meters and 5CM setting can be cut out to 9000
square meters (tested on W210)

For milling machines below 1M, under normal construction condition and
operation:

T5WS, medium hardness asphalt or concrete pavement, on general road
pavement is capable of 4500 square meters, and the harder asphalt pavement
is capable of 2000.

維11
 

 

 

LANGUAGE
CLOSE
Copyright © 2020 EVERPADS Co., Ltd (HEADQUARTER). All Right Reserved.